Modded PAM CG Lever, crappy iphone pics

**murchyk** · 02-05-2012, 06:16 PM

Hi all, i am fairly new to the forum. I have been on here for a few months but not too active. Recently i started playing with a few reps i have, and here is what i did to tonys $99 special PAM 186 which had a loose flimsy CG lever.(not sure if thats what you call it.

Click image for larger version.

Name: IMG_6091 (1).jpg
Views: 24
Size: 52.5 KB
ID: 19295

First i opened up the existing hole to a 1/16" and plugged it with a brass plug 1/16"

Click image for larger version.

Name: IMG_6093 (1).jpg
Views: 18
Size: 29.2 KB
ID: 19296

Then i drilled a 1.2 mm hole for the existing pin to tightly fit through.

Click image for larger version.

Name: IMG_6096 (1).jpg
Views: 21
Size: 46.6 KB
ID: 19297

Heres a pic with the hole in a brass bushing.

Click image for larger version.

Name: IMG_6101 (1).jpg
Views: 19
Size: 28.6 KB
ID: 19298

Then i reassembled the crown-guard and sanded the pin flush to the surface, followed by brushing it to match the finish of the case. and here is the result. you don't see most of the job done, but it feels way bette than it was.