Omega Watch Pin Not Screwing Back In

[nabz]

Hi,

I have the following two Omega Seamaster watches but both of the pins of the watches where I can change the time and date is not screwing back in. I don't know if it's the spring that's gone but I am willing to purchase the parts for the watches to get it fixed - but can someone please guide me to where I can buy these parts? I asked the seller from whom I bought the watch from but he has told me that both of these watches are out of production?

Can someone please guide me on how I can get the parts please? Photo attached for reference.

Thanks,

Nabz.

PS. Sorry if I have posted in the wrong thread.

[Hernan]

Either the crown is stripped or the tube is stripped. You will have to find either a gen set or see if anyone sells a rep set.

Measure the crown in MM then look on eBay for an Omega crown tube set that looks the same.

If you find one that is the same size and look a watchmaker will need to push the tube out from the inside and put the replacement in.

Sent from my Pixel 6 using Tapatalk

[vdusanv]

Fast solution is to take crowns out and squeeze gently with tweezers tubes ( with feeling just a bit) and it screws down again. Threads on tubes are fine in my opinion, just a little used down.

Poslano z mojega SM-A525F z uporabo Tapatalk

[Tucker]

I’ve had several PO reps with stripped tubes. They are notorious for that issue.