Hello!

[malevolent]

I apologize because I misunderstood. I didn't realize it was a misunderstanding. I was under the impression you were banned for willfully misrepresenting a watch and pricing it a good $500 over its worth.

Sent from my SM-G900W8 using Tapatalk

http://www.repgeek.com/showthread.ph...ighlight=16613

It was originally rather high value.

It is a BK Noob 16613 with gen insert, crystal and gasket along with the work done for that.

The amount I paid in total was over 1k to achieve that.

The conversation they posted earlier was before that work was done and again, it was a private conversation (very hostile) with someone who I used to be connected with in the rep community.
As you can tell, there's a reason I don't talk to him anymore.

[Garybronz]

http://www.repgeek.com/showthread.ph...ighlight=16613

It was originally rather high value.

It is a BK Noob 16613 with gen insert, crystal and gasket along with the work done for that.

The amount I paid in total was over 1k to achieve that.

The conversation they posted earlier was before that work was done and again, it was a private conversation (very hostile) with someone who I used to be connected with in the rep community.
As you can tell, there's a reason I don't talk to him anymore.

And that reason is that you, Malevolent, are an ASSCLOWN! Yea, I said it!

[malevolent]

Brother I know your kidding right. I have NEVER EVER disrespected you. I watched you unfold on RWI. I found out you were selling stolen software to people on the site. Then I was going to give you money and hold your WM9 till you could give it back. Remember? Actually today was the day that if you didn't sell it by I would give you the $1000. You already by then knew that it wasn't a WM9 16613. You were going to even screw me. So I believe you should just be band from all rep sites.

RWI treated you well. It was you, unless there is something you want to say that none of us know?

You tried to rip people off because you want to make money by fraud. Trying to charge up to $1000 for what you said was a WM9 16613. I am sorry. Its just not what you say. You screwed us as a site, family and friends.

What stolen software? I am literally licensed lol, I actually make quite a bit of money from that on the side, but that's a conversation for another day.

Yes and again, as I have stated over and over, once I found the value of it I decreased the price. I would have refunded anything anyone who bought it paid that was considered overpaying.
All of my other pieces ever sold on RWI were sold at a loss. This was one simple mistake that was blown out of proportion.

I was not willing to screw you, I refused to sell to you for the reason you did not need anymore reps.

RWI did not treat me well at all.

It's also a BK Noob 16613 from here: http://www.repgeek.com/showthread.ph...ighlight=16613

with the work and gen parts the value is over 1k

I screwed no one.

- - - Updated - - -

And that reason is that you are an ASSCLOWN! Yea, I said it!

How so? Your having to use words like that is what truly determines a person. Clearly your attitude is rather negative and unfounded.

[Garybronz]

What stolen software? I am literally licensed lol, I actually make quite a bit of money from that on the side, but that's a conversation for another day.

Yes and again, as I have stated over and over, once I found the value of it I decreased the price. I would have refunded anything anyone who bought it paid that was considered overpaying.
All of my other pieces ever sold on RWI were sold at a loss. This was one simple mistake that was blown out of proportion.

I was not willing to screw you, I refused to sell to you for the reason you did not need anymore reps.

RWI did not treat me well at all.

It's also a BK Noob 16613 from here: http://www.repgeek.com/showthread.ph...ighlight=16613

with the work and gen parts the value is over 1k

I screwed no one.

- - - Updated - - -



How so? Your having to use words like that is what truly determines a person. Clearly your attitude is rather negative and unfounded.

My words and attitude are because you tried to screw me, and I don't take kindly to that. But I guess it's just the case of "your right and the rest of the world(or forum) is wrong" mentality.

[malevolent]

My words and attitude are because you tried to screw me, and I don't take kindly to that. But I guess it's just the case of "your right and the rest of the world(or forum) is wrong" mentality.

Gary look, I am sorry you feel that I screwed you. I can't admit to it because as I told you, once I figured it out or if you did, I would have gladly refunded the price that was for the WM9 claim.

I realize you will not come to forgive me and I accept that so there's no use in further replies. If you have any specifics you can shoot me a PM or continue to call out here, I will be more than happy to provide my account of it.

[QueTip]

http://www.repgeek.com/showthread.ph...ighlight=16613

It was originally rather high value.

It is a BK Noob 16613 with gen insert, crystal and gasket along with the work done for that.

The amount I paid in total was over 1k to achieve that.

The conversation they posted earlier was before that work was done and again, it was a private conversation (very hostile) with someone who I used to be connected with in the rep community.
As you can tell, there's a reason I don't talk to him anymore.

That is utter BS. You didn't buy it from heero. You bought it backdoor from the guy that bought the watch from heero.
Hero sold it for $780, any other normal guy will lower the price when reselling. So did he. To $500.

btw: don't expect to be treated any different than **** if you behave and act like ****.

[malevolent]

That is utter BS. You didn't buy it from heero. You bought it backdoor from the guy that bought the watch from heero.
Hero sold it for $780, any other normal guy will lower the price when reselling. So did he. To $500.

btw: don't expect to be treated any different than **** if you behave and act like ****.

Never said I bought it from heero, I was linking to the original piece which did have the WM9 part.
I misunderstood at the time what a WM9 was.

The value I have put it with work and parts is still over my asking price.

I could care less what I am treated like, I am used to it from those at RWI, all I ask for is some humility as no one seems to be providing it.

There's a reason all of my sales were just fine in that thread besides the 16613 and why the other pieces from the past all sold just fine.

[QueTip]

Never said I bought it from heero, I was linking to the original piece which did have the WM9 part.
I misunderstood at the time what a WM9 was.

The value I have put it with work and parts is still over my asking price.

I could care less what I am treated like, I am used to it from those at RWI, all I ask for is some humility as no one seems to be providing it.

There's a reason all of my sales were just fine in that thread besides the 16613 and why the other pieces from the past all sold just fine.

Please explain a $750 price raise with a gen insert and crystal? That sounds funny.
Especially asking price has to be adjusted lower from your 'ins' since the insert had a cracked pearl and the crystal was spinning.

- - - Updated - - -

Oh wait, it maybe had a gen gasket

[malevolent]

Please explain a $750 price raise with a gen insert and crystal? That sounds funny.
Especially asking price has to be adjusted lower from your 'ins' since the insert had a cracked pearl and the crystal was spinning.

- - - Updated - - -

Oh wait, it maybe had a gen gasket

That was the WM9 thought which ended up being a mistake on my part.
A great mistake at that considering how much buzz it has caused.

Now that I have given it the full time I should have given it before (I thought a WM9 was just the hollowed out wrapped bracelet and what not, yes I know that is ignorant) I have come to realize it isn't worth nearly as much.

If anything I would like to sell the other pieces I have even if I have to keep the 16613.
I will gladly NOT sell it if it helps soothe everyone, or at this point I will drop the price more if needed (even though that makes no sense to me because that's even more lost money)

I would be glad to get people who can vouch for my paying a total of $1k+ for this watch modded to the current condition if needed.

[QueTip]

That was the WM9 thought which ended up being a mistake on my part.
A great mistake at that considering how much buzz it has caused.

Now that I have given it the full time I should have given it before (I thought a WM9 was just the hollowed out wrapped bracelet and what not, yes I know that is ignorant) I have come to realize it isn't worth nearly as much.

If anything I would like to sell the other pieces I have even if I have to keep the 16613.
I will gladly NOT sell it if it helps soothe everyone, or at this point I will drop the price more if needed (even though that makes no sense to me because that's even more lost money)

I would be glad to get people who can vouch for my paying a total of $1k+ for this watch modded to the current condition if needed.

Who should vouch for that? QueTip gave you a more than kind estimate of the worth of yours.
It's probably even lower now since it has came out it's a noob and not a MBW.

$500 - Watch
$150 - Insert
$100 - Crystal

Those are really HIGH estimates. You can get tritium inserts as yours and non LEC as also yours for a LOT less than that price. (~$50 for each)

That puts it at $100 ontop of the $500 invested in the base watch. Now add watchsmith work to install a gen insert and crystal. Case doesn't seem to be gen spec since it's a noob but even that is not that much of work that it can be thrown up to what I have estimated the watch in the first place if it was MBW.

[malevolent]

You REALLY think anyone is going to buy ANYTHING from you? If they do, shame on them because they will be warned.

My pieces can all be proven in terms of where they were purchased, for how much, etc.

I am more than happy to provide any information needed to sell the pieces at a lower value if need be.

Again, this is one trip up out of 30+ deals regarding other watches.

- - - Updated - - -

Who should vouch for that? QueTip gave you a more than kind estimate of the worth of yours.
It's probably even lower now since it has came out it's a noob and not a MBW.

$500 - Watch
$150 - Insert
$100 - Crystal

Those are really HIGH estimates. You can get tritium inserts as yours and non LEC as also yours for a LOT less than that price. (~$50 for each)

That puts it at $100 ontop of the $500 invested in the base watch. Now add watchsmith work to install a gen insert and crystal. Case doesn't seem to be gen spec since it's a noob but even that is not that much of work that it can be thrown up to what I have estimated the watch in the first place if it was MBW.

I have the original transactions if proof is needed for the pricing.